About 3G tracker(3g gps dvr tracker) - IGreenView Optoelectronic Co.,Ltd

Blog

About 3G tracker(3g gps dvr tracker)

GPRS/UMTS/GSM/GPS

3G DVR tracker (3G GPS tracker)

1. Summery

Working based on HSDPA,UMTS,EDGE,GSM,GPRS network and GPS satellites, this product can also anti-theft ,locate, monitor and provide urgent service to any remote targets .It is featured with compact and use-easy characteristics and therefore is mainly used in monitoring ,locating and tracking the car and other mobile things.

At the same time, it completely support the data transportation function of SMS/GPRS/HSDPA/Internet ,making it available for wide-area monitor, urgent dispatch ,traffic safety management and many different fields.

2. Features

1. use USIM card, support WCDMA 3G network and GSM network.

2 .use video cables to connect CCD simulated camera externally.

3. support SMS/GPRS/ HSDPA/Internet data transportation (GPS/Internet will be illustrated in addition)

4. support mobile phone message to control and reach privacy security

5. support alarm by SMS ,voice call and video call.

6. record a vedio of alarm process to SD card

7. Built-in Li-ion battery, can work normally even in power off state.

8. monitor the place any time any where by video call.

9. integrate anti-theft, location, real-time control,monitor,video record, urgent alarm and tracking service.

10. FTP function: use FTP function upload mp4 video file to server.

11. mainly used in monitoring and locating the ship and train, and in fleet management of moving car and truck.

3. Production description

1 LED indicator light 2\USB jack

3\USIM jeck 4\GPS anntenna

5\ 3G antenna 6\SD CARD jack

7\ ON/OFF 8\Connection port

9\external camera jack

Indicator light instruction

The state represented by indicator light are as below:

Color	Action	Statement
red	Slow flicker	connecting to network after starting system
	Quick flicker	Alarm state
	Always on	Network failed
green	Always on	Arming state
	Slow flicker	Disarming state
	Quick flicker	Data processing

4. Specification

Content	Specification
Dim	66x111x27 mm
Weight	256g
Network	HSDPA,UMTS,EDGE,GSM/GPRS
Net frequency channel	EDGE/GPRS/GSM 850/900/1800/1900 MHz HSDPA/UMTS 850/1900/2100 MHz
Chip	SIRF3 chip
3G chip	WCDMA
GPS sensitivity	-159dBm
GPS accuracy	5m
Time to first initiate	Cold status 45s Warm status 35s Hot status 1s
Input voltage	12V input
User-defined input alarm detection level	0V
Video form	MP4
Battery	Chargeable changeable 3.7V 800mAh Li-ion battery
Standby	48hours
Storage temp	-40°C to +85°C
Operation temp	-20°C to +55°C
Humility	5%--95% non-condensing

5\Noun Definition

Locate mode:in this mode ,all the alarming information will be send every 3 minutes with Geo-info and begin to record a video.

3G monitor mode:all the alarm system will inform the master by incoming video call . It will then call the other member one by one until the phone is available if the master is not around. However, the device can dial all the phone numbers for 3 times. After failing 3 times, the unit will stop dialing automatically.

Incoming video phone

Master and normal members can initiate video by calling the host machine.

Arming: in this state, the device will alarm according to the alarming mode of the time if external inputting port is triggered

Disarming: I t means to deactivate the alarm state, and the device won't alarm when the external inputting port is touched.

Hardware Reset

Press the emergency button, and slide the switch(ON/OFF) of the tracker to "ON", keep this operation for 5 seconds until green LED become red , the tracker will automatically restore factory settings and clear authorization number after it flicker twice.

.Use:

First step: connection

1\Find the matched wire, and insert the jack of the product.

2\fix the included camera in the needed cabin ,please turn the camera on the right direction.

Insert one end of video plug into the IN1 video jack of host machine, another end used to connect video interface. Finding the included camera power wire ,then insert it into the corresponding 12V camera input interface, another end connect the camera CD plug.

3 Connect urgent button with red and black wires.

4 set aside an external inputting jack to alarm,which is called negative triggering, it alarm when the unit is in the defence-conceling state.

5. Connect GPS antenna 3G antenna. Tighten the nut

6. Insert the external monitoring microphone to monitoring jack.

7. It can support 8GB SD card at most ,mainly used in recording a video when calling the police.

8. Connect the red and black wires (power cord of the unit) to the positive and negative electrodes of the car, red wire to + and black wire to -

Circuit graph

Pre Page: "i-View" Technology Next Page: HD-SDI cameras VS megapixel IP cameras

Product (497)

Special Groups (426)

CCTV Glossary (3)

News (9)

Certificates (3)

Blog (30)

i-View Technology (1)

CCTV Boutique (1)

New CCTV Product Catalog (1)

Credit Report

Products Index

Company Info

Blog